Free | Valid Cisco 300-085 study guides for pass the exam in the first attempt

Posted on March 6, 2020December 25, 2023By admin

How can I get valid 300-085 study guides for passing the exam in the first attempt?Preparing for exams?Give yourself the best chance with Pass4itsure and try not to let the stress increase! Remember: you have Pass4itsure.https://www.pass4itsure.com/300-085.html Pass4itsure 300-085 dumps Help you succeed!

Valid 300-085 study guides

Before you begin preparations, you must have the appropriate guidance and roadmap. You must prepare for the exam at least one week in advance.
You need theoretical and practical knowledge to pass the Cisco 300-085 certification exam. When preparing for the exam, you should be able to use theoretical information in practical troubleshooting and network issues. Therefore, practical knowledge is required.
If you want to pass the 300-085 exam for the first time, then you need to complete the official study materials before completing the exam. Pass4itsure will provide you with the latest and latest practical exam questions that will help you pass the exam easily.

You may also be interested in other Cisco exam dumps!

CCNP Change 2020

300-085 CAPPS

The 300-085 exam has been retired as of February 24, 2020.

Original CCNP RS and CCNP Wireless direction combined into CCNP Enterprise direction

CCNP Collaboration exam change

After February 24, 2020: 300-085 exam replaced with 350-801 exam

Implementing Cisco Collaboration Core Technologies (350-801 CLCOR)

https://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/clcor-350-801.html

CCNP Collaboration exam dumps share

Pass4itsure Discount Code

Free Cisco 300-085 dumps PDF download [Google Drive]

Cisco 300-085 dumps PDF https://drive.google.com/open?id=19nO32b4BDY7bhOVes0zJqpJC-IeC8QAX

Cisco 300-085 exam practice questions online

Pass the Exam 300–085 in first Attempt, Best Passing rate,Updated Exam.

QUESTION 1
You configure a Cisco Unity Express module to integrate with Cisco Unified Communications Manager Express. You
can use the following command to connect to the module from the Cisco Unified Communications Manager Express
CLI:
ABC_CORP#service-module integrated-Service-Engine 0/0 session
Trying 10.1.10.2, 2002 …
Open se-10-1-10-1#
However, you cannot pint the module from Cisco Unified Communications Manager Express and cannot use a web
browser to connect the module. You see this message:
ABC_CORP#ping 10.1.10.1
Type escae sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.1.10.1, timeout is 2 seconds:
Success rate is 0 percent (0/5)
How can you fix this problem?
A. Enable ICMP and web service on the Cisco Unity Express module.
B. Enable the ISM interface on Cisco Unified Communications Manager Express.
C. Add an IP address to the ISM interface in the same subnet as Cisco Unified Communications Manager Express.
D. Add a host route from Cisco Unified Communications Manager Express to Cisco Unity via the ISM interface.
Correct Answer: C

QUESTION 2
Which two transfer types are used by Cisco Unity Connection to process more calls quickly? (Choose two.)
A. No Holding Transfer
B. Release to VPIM
C. Supervise Transfer
D. Release to Switch
E. Say Good-Bye
Correct Answer: CD

QUESTION 3
What is the maximum number of users that can be imported into Cisco Unity Express from Cisco Unified
Communications Manager Express at one time?
A. 200
B. 100
C. 500
D. 50
Correct Answer: Aa

QUESTION 4
When importing users into Cisco Unity Connection by using AXL, what can cause a user not to be listed in the import
view?
A. if the user primary extension is set to “none” on Cisco Unified Communications Manager
B. if the userdigest credentials are not set
C. if the userwas imported into Cisco Unified Communications Manager by usingLDAP
D. if the user is not assigned to the Standard CTI Enabled access control group on Cisco Unified Communications
Manager
Correct Answer: A

QUESTION 5
What is the procedure for importing users from Cisco Unified Communications Manager Express into Cisco Unity
Express?
A. Create the username and password in Cisco Unified Communications Manager Express, configure Cisco Unity
Express with the CLI administrator username and password, and use the CLI synchronization command under
telephony-services to import as many users as are supported by Cisco Unified Communications Manager Express.
B. Create the username and password in Cisco Unified Communications Manager Express, configure Cisco Unity
Express with the web administrator username and password, and click Synchronize Information under the
Administration menu to import as many users as are supported by Cisco Unified Communications Manager Express.
C. Create the username and password in Cisco Unified Communications Manager Express, configure Cisco Unity
Express with the CLI administrator username and password, and use the CLI synchronization command under
telephony-services to import up to 200 users from Cisco Unified Communications Manager Express.
D. Create the username and password in Cisco Unified Communications Manager Express, configure Cisco Unity
Express with the web administrator username and password, and click Synchronize Information under the
Administration menu to import up to 100 users from Cisco Unified Communications Manager Express.
E. Create the username and password in Cisco Unified Communications Manager Express, configure Cisco Unity Express with the web administrator username and password, and click Synchronize Information under the
Administration menu to import up to 200 users from Cisco Unified Communications Manager Express.
Correct Answer: E

QUESTION 6
Which can be used in the jabber-config.xml file to enable UDS?
A. True
B. True
C. UDS
D. UDS
Correct Answer: C

QUESTION 7
You are trying to add Cisco VCS to Cisco TMS, but the addition is failing. Which three scenarios might be causing this
failure? (Choose three.)
A. Cisco TMS is running a version earlier than 12.5.
B. Cisco TMS was not upgraded before adding Cisco VCS.
C. Cisco TMS and Cisco VCS do not have synchronized time settings.
D. SNMP is not enabled on Cisco VCS.
E. UDP port 161 is blocked on the network.
F. The management address on Cisco VCS does not match the Cisco TMS IP address.
Correct Answer: DEF

QUESTION 8
Which three options are used when setting up connectivity between Cisco Unified Communications Manager and Cisco
Presence Server? (Choose three.)
A. SIP trunk
B. conference bridge
C. SIP trunk security profile
D. SIP profile
E. remote destination profile
Correct Answer: ACD

QUESTION 9
In which two scenarios would a caller who is calling into the Cisco Unity Connection general pilot number hear the
opening greeting of the voice-mail system and be prompted for a user ID and PIN? (Choose two.)
A. non-subscriber
B. subscriber who sends the calling number
C. subscriber who does not send the calling number
D. A SIP phone user will always be prompted for a user ID and PIN.
E. An SCCP phone user will always be prompted for a user ID and PIN.
F. The scenario is invalid.
Correct Answer: AC

QUESTION 10
Which jabber-config.xml variable do you use to allow remote Jabber users to connect using Collaboration Edge?
A.
B.
C.
D. YES
E. TRUE
Correct Answer: B

QUESTION 11
Where do you navigate to within Cisco TMS to place a call?
A. Systems > Navigator > Endpoint > Call Status
B. Systems > Monitoring > Endpoint > Place Call
C. Endpoint > Navigator > Call Status
D. Booking > List Conferences > Place Call
E. Systems > Navigator > Manage Dial Plan > Place Call
F. Systems > Navigator > Provisioning > Place Call
Correct Answer: A

QUESTION 12
In which three of the following cases can VPIM Networking be used for messaging? (Choose three.)
A. Cisco Unity systems where the partner Microsoft Exchange Servers are in different Active Directory forests
B. Cisco Unity with Microsoft Exchange 2000 or Microsoft Exchange 2003, and Cisco Unity with Lotus Domino
C. Cisco Unity and Cisco Unity Express
D. Cisco Unity and the Cisco Presence Server
E. Cisco Unity and Cisco Unified Communication Manager
F. Cisco Unity and Cisco Unified Contact Center Express
Correct Answer: ABC

QUESTION 13
Which codec is supported in Cisco Unity Express?
A. G.711
B. G.721
C. G.729
D. Q.850
E. Q.931
F. Q.2931
Correct Answer: A

Study Tips：

Pass the Exam 300–085 in first Attempt,valid Cisco 300-085 study guides https://www.pass4itsure.com/300-085.html(Q&As: 289 )latest and updated actual Cisco 300-085 exam questions that will help you to pass this exam

Move to top